The Cisco 350-601 DCCOR exam has become one of the most in-demand certifications for data center engineers in 2025. With businesses increasingly relying on AI-enhanced automation, multi-cloud fabrics, and advanced security frameworks, Cisco’s Data Center Core exam now represents far more than a technical test—it’s proof that you can operate modern enterprise data centers under real-world pressure. If you’re preparing for this exam, you’ve probably noticed the complexity rising year after year, and the 2025 blueprint shows Cisco’s strongest shift toward cloud-native operations so far.
Why the Cisco 350-601 DCCOR Exam Matters in 2025
Digital infrastructure in 2025 is no longer traditional. Hybrid cloud integrations, hardware abstraction layers, and container-based workloads dominate modern data centers. Companies are actively searching for engineers with verified hands-on capabilities in Cisco ACI, Intersight, automation frameworks, and Zero Trust operations.
The 350-601 DCCOR certification is now considered a core benchmark for mid- to senior-level data center roles, including:
- Data Center Engineer
- Network Automation Engineer
- Cloud Infrastructure Engineer
- Data Center Security Specialist
What’s New in the 350-601 Exam
Cisco confirmed updates to reflect real-world data center evolution.
Cisco Security Enhancements
Security weight has increased with focus on:
- Zero Trust workload segmentation
- Microsegmentation in ACI
- Enhanced fabric encryption
[Source: Cisco Official]
AI-Driven Data Center Operations
Cisco integrated AI operations in:
- Intersight workload optimization
- AI-based anomaly detection for Nexus Dashboard
Automation Requirements Increased
Candidates must now understand:
- Terraform basics with Cisco modules
- REST API operations for ACI and UCS
- GitOps workflows in modern data centers
Understanding the 350-601 Exam Structure
The test covers core data center technologies, focusing on the following areas.
Data Center Architecture
Includes Nexus architecture, fabric topologies, and overlay networking.
Compute
Focus on UCS Manager, UCS X-Series, and fabric interconnect operations.
Storage Network
Covers MDS fabric operations, zoning, SAN troubleshooting, and FCIP.
Automation and Orchestration
Heavy API usage, Python basics, and Intersight automation workflows.
Security
Zero Trust, encryption, segmentation, and data center firewalling basics.
Deep Dive into Key Exam Domains (2025)
Modern Data Center Infrastructure
2025 infrastructure emphasizes hybrid workloads and application mobility.
Updated Cisco ACI Features
Key additions tested in 2025 include:
- ACI Multi-Site Orchestrator advanced operations
- Enhanced Endpoint Tracker
- ACI Cloud APIC integrations
UCS X-Series Evolution
With X-Series widespread deployment, the exam includes:
- X-Fabric bandwidth optimization
- IMM (Intersight Managed Mode) operations
Intersight Cloud Management
Cloud-native lifecycle management, automation profiles, and observability.
Practical Skills You Must Master Before Exam Day
Data Center Fabric Troubleshooting
Key areas:
- Overlay/underlay sync issues
- VXLAN EVPN verification
- Endpoint mobility flows
Nexus Dashboard Operations
Real-time health monitoring and advisory reports.
ACI Policies & Contracts
Candidates must design small-scale and multi-tenant structures.
Zero Trust Implementation
Identity-enabled segmentation for workloads.
Best Preparation Strategy for 350-601 in 2025
Weekly Study Framework
A practical 6-week plan:
- Week 1–2: DC architecture + compute
- Week 3: ACI + multi-site workflows
- Week 4: Storage + FC/FCoE
- Week 5: Automation & APIs
- Week 6: Security, labs, practice exams
Lab Scenarios Matter More Than Ever
Cisco’s 2025 exam heavily rewards real configuration experience.
Common Mistakes Candidates Make
- Memorizing instead of practicing
- Ignoring ACI Multi-Site
- Underestimating automation weight
Latest 350-601 Practice Questions And Answers
| Number of exam questions | Compelet Study Materials |
| 15 (Free) | 638 Q&A |
Q1: Which method can be used before application profile can be configured?
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error massage.
A. POST to aaaLogin
B. POST to aaaRefresh
C. POST to aaaLogout
D. GET to aaaListDomains
Correct Answer: A
Q2: Which configuration set meets these requirements?
An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, one other policies. Also, the operations team requires the backup file to be in a human-readable format.
A. Type: All configuration Protocol: FTP
B. Type: Full state Protocol: SFTP
C. Type: Logical configuration Protocol: TFTP
D. Type: System configuration Protocol: SCP
Correct Answer: C
Q3: Which action must be taken to build the data center interconnect?
An engineer must implement a VXLAN-based data center interconnect. The long-distance transport provided by a service provider is IP-based, supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication.
A. Announce host reachability over BGP.
B. Create an IP access list and associate it with VNI to replicate traffic to remote VTEPs.
C. Configure a route map to associate the IPs of the remote VTEPs.
D. Implement BGP EVPN ingress replication.
Correct Answer: D
Question 4:
Refer to the exhibit.
A network engineer created a new role to be assigned to the SAN users. The requirement is for users to have these characteristics:
1.
permitted to show access to the system, SNMP, module, and hardware information.
2.
permitted to run debug zone and exec fcping commands.
3.
restricted from accessing show feature environment command.
Which configuration set meets these requirements?
A. MDS-B(config)# role name default-role MDS-B(config-role)# rule 5 deny show feature environment
B. MDS-B(config)# role name default-role MDS-B(config-role)# rule 5 permit show feature module MDS-B(config-role)# rule 6 deny *
C. MDS-B(config)# role name san-users MDS-B(config-role)# rule 3 deny show feature environment
D. MDS-B(config)# role name san-users MDS-B(config-role)# rule 3 permit show feature system MDS-B(config-role)# rule 4 permit show feature hardware MDS-B(config-role)# rule 5 permit show feature module
Correct Answer: D
Q5: Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?
A. switch(config-vsan-cb># vsan 100 bind interface fc 3/1
B. switch
C. switch(config-vsan-db># vsan 100 fc 3/1
D. switch(config-vsan-db)# vsan 100 interface vfc 31
Correct Answer: D
Q6: Which set of commands must be used to meet these requirements?
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc1/1-12 and then for ports fc1/13-24 for the next 60 seconds. Ports in the range fc1/13-24 were already enabled for analytics.
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
Q7: Which set of CLI commands must be used to establish EIGRP neighborship?
Refer to the exhibit.
Two Cisco Nexus Series Switches use EIGRP between their Eth1/1 interfaces. The switches are configured to support EIGRP authentication.
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: A
Q8: What occurs when running the command install deactivate while a software maintenance upgrade is performed on a Cisco Nexus 9000 Series switch?
A. The current set of packages is committed.
B. The package is removed from the switch.
C. The package features for the line card are disabled.
D. The current upgrade stops.
Correct Answer: C
Q9: Which statement about microsegmentation is true?
An engineer is running an ACI fabric, has VMM integration with VMware vCenter, and wants to enable microsegmentation based on vCenter VM attributes.
A. ACI does not support microsegmentation based on vCenter VM attributes. You should use network attributes for mircosegmentation.
B. An ACI microsegmented EPG automatically creates a port group with a private VLAN configured on a VMware vCenter distributed virtual switch.
C. When enabled, microsegmentation performs distributed switching and routing on the ESXi hosts.
D. Microsegmentation is supported only using AVE or AVS.
Correct Answer: B
Q10: Which configuration set accomplishes this goa?
An engineer must integrate Cisco ACI with a VMware vSphere environment. The requirement is to use a VMware Distributed Virtual Switch and to assign the encapsulation VLAN of the EPG from the VLAN pool.
A. Create a VMM domain association under the EPGs Create a VLAN pool with static alocated VLANs.
B. Create a physical domain association under the EPGs Create a VLAN pool with static alocated VLANs.
C. Create a physical domain association under the EPGs. Create a VLAN pool with oVnarmc alocated VLANs
D. Create a VMM domain association under the EPGs Create a VLAN pool with dynamic alocated VLANs.
Correct Answer: D
Q11: Which task provides the necessary resources?
A network administrator must create a Linux container on a Cisco Nexus Series Switch. The container requires 10 percent of the CPU of the switch and 1024 MB of RAM to run successfully.
A. Edit the container properties with the guestshell run command.
B. Increase the compute resources with the guestshell resize command.
C. Enable the Bash shell of the switch with the feature bash command
D. Modify resource allocation with the virtual-service resize command.
Correct Answer: B
Q12: Which configuration must be applied to create the virtual Fiber Channel interface and associate it with the Ethernet physical interface?
A network engineer configures a converged network adapter (CNA) and must associate a virtual fiber Channel 7 interface to VSAN 7. The CAN connected to the interface Eth1/7, and VLAN 700 is mapped to the VSNA.
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
Q13: Which command completes the script?
Refer to the exhibit.
A developer must create a Bash script that performs a Chef Client reload in the event of a system reset.
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
Q14: Which feature set must be used to configure on switch 2 to establish a VSAN trunk between switch 1 and switch 2?
Refer to the exhibit.
A. F Port Trunk Mode Passive
B. N Port Trunk Mode Active
C. NP Port Trunk Mode Auto
D. E Port Trunk Mode On
Correct Answer: D
Q15: Which VLANs are capable to be assigned on vPC interfaces?
Refer to the exhibit.
A. 100-103
B. 100-104
C. 100-102
D. 100-105
Correct Answer: D
…
Latest Reliable Resources for 350-601
Cisco Official Resources
- Cisco Learning Network
- Cisco ACI Configuration Guides
- Cisco UCS X-Series Docs
Community & Discussion Platforms
Role-based communities provide real troubleshooting scenarios.
Leads4pass Updated Dumps
Leads4pass remains widely used by candidates due to its frequently updated material aligned with the latest blueprint.
Explore: Cisco 350-601 Dumps (https://www.leads4pass.com/350-601.html) (VCE/PDF)
Expert Insights & Personal Recommendations
As an IT content creator and long-term exam researcher, I’ve consistently seen one pattern: engineers who pass the 350-601 exam are those who combine official documentation, real lab practice, and updated practice tests. In 2026, automation and ACI knowledge are the biggest differentiators.
Conclusion
The 350-601 DCCOR exam continues to evolve with the transformation of global data center technologies. With the right preparation strategy and updated study materials, candidates can confidently navigate this challenging certification. Leads4pass consistently updates its content, while Cisco’s official learning platforms provide the foundational knowledge you need. Combined with hands-on labs and practice exams, you can position yourself for success in the 2025 exam environment.
FAQs
1. Is the Cisco 350-601 exam updated for 2025?
Yes, the blueprint includes new automation, ACI, and security topics.
2. How long should I prepare for 350-601?
Most candidates need 6–10 weeks depending on experience level.
[Source: Public Information Compilation]
3. Do I need hands-on ACI experience?
Highly recommended—ACI is one of the heaviest weighted components.
4. Are third-party dumps helpful?
They can supplement learning if updated but should not replace labs.
5. What is the best mix of resources?
Cisco official docs + labs + updated practice tests.