The latest Cisco CCDE 352-001 exam dump and 352-001 pdf free sharing, easily pass the Cisco CCDE 352-001 exam certification. “CCDE Written Exam” lead4pass.com year-round exam questions to ensure high pass rates
Table of Contents:
- Latest Cisco CCDE 352-001 pdf
- Test your Cisco CCDE 352-001 exam level
- Watch the Cisco CCDE 352-001 video tutorial online
- Related 352-001 Popular Exam resources
- Get Lead4Pass Coupons (12% OFF)
- What are the advantages of Lead4pass?
Latest Cisco CCDE 352-001 pdf
[PDF] Free Cisco CCDE 352-001 pdf dumps download from Google Drive: https://drive.google.com/open?id=1tcZ_OsnFa2Zc0yXCf2bj3NUs_f2NbQXi
[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx
352-001 CCDE – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/ccde.html
Test your Cisco CCDE 352-001 exam level
QUESTION 1
An enterprise customer has a national WAN network based on DMVPN over the Internet, with sites located throughout
the country. The customer has recently deployed VoIP throughout the entire network , and users report that it takes up
to 2 seconds to establish a telephone call to an IP telephone at another office network. Drag and drop the root cause
and the corresponding design solution from the left onto the correct targets on the right Not all options are used
Select and Place:
Correct Answer:
QUESTION 2
You have been asked to design a high-density wireless network for a university campus.
Which three principles would you apply in order to maximize the wireless network capacity? (Choose three.)
A. Increase the number of SSIDs to load-balance the client traffic.
B. Choose a high minimum data rate to reduce the duty cycle.
C. Make use of the 5-GHz band to reduce the spectrum utilization on 2.4 GHz when dual- band clients are used.
D. Enable 802.11ag channel bonding on both 2.4 GHz and 5 GHz to increase the maximum aggregated cell
throughput.
E. Use directional antennas to achieve better sector separation channel reuse.
F. Implement a four-channel design on 2.4 GHz to increase the number of available channels.
Correct Answer: BCE
QUESTION 3
Which two statements about the various types or DevOps tools are true? (Choose two)
A. Puppet requires the installation of a master (server) and agents (clients) architecture for configuring systems.
B. Salt cannot communicate with clients through general SSH, it use minions client agents only.
C. Puppet and Chef are written in Python, Python skills are a must to operate these two.
D. Ansible does not require agent node installation and uses SSH for performing all tasks.
E. Chef and Puppet are much more attuned to the needs of system administrators.
Correct Answer: AD
QUESTION 4
Which DCI technology utilizes a “flood and learn” technique to populate the Layer 2 forwarding table?
A. OTV
B. E-VPN
C. VPLS
D. LISP
Correct Answer: A
QUESTION 5
Which open source message broker is in the Cisco Cloud Center?
A. Apache kafka
B. HornetQ
C. RabbitMQ
D. Fuse Message Broker
E. Oracle Message Broker
Correct Answer: C
QUESTION 6
Which two options are reasons for designing a large OSPF network with multiple areas connected to the backbone?
(Choose 2)
A. Reduce the number of routes within an area.
B. Route tagging capability.
C. Enhance failure detection.
D. Simplify logical topology.
E. Reduces SPF algorithm runs.
Correct Answer: AE
QUESTION 7
Your company will attach to a new Gigabit Ethernet-based wide area network from the local service provider for remote
connectivity. Each connection will have a 150 Mb/s committed information rate. For the design of this new service,
which QoS mechanism should be used to ensure low packet loss toward the service provider network?
A. shaping
B. policing
C. CBWFQ
D. RED
Correct Answer: A
QUESTION 8
Currently a service provider provides IPv4 traceroute services between MPLS PE routers. The provider wants to
implement IPv6 with MPLS 6PE/6VPE and then provide parallel IPv6 traceroute services between MPLS PE routers.
Which two design solutions provide this service? (Choose two.)
A. The P routers must support ICMPv6.
B. The PE routers must support ICMPv6.
C. The P routers must support full IPv6.
D. The PE routers must support full IPv6.
Correct Answer: BD
QUESTION 9
Which technology, implemented on aggregation-edge nodes at the aggregation layer, provides per-tenant isolation at
Layer 3, with separate dedicated per-tenant routing and forwarding tables on the inside interfaces of firewall contexts?
A. VLAN
B. VXLAN
C. VRF-lite
D. VDC
Correct Answer: C
QUESTION 10
AS100 and AS200 each have two peering points in different parts of their network. AS100 would like to use one of the
links and keep the other link as backup. What should be changed for the design inside AS100 for prefixes received from
AS200?
A. MED
B. weight
C. AS-PATH
D. local preference
Correct Answer: D
QUESTION 11
On a large-scale DMVPN network design, what are two DMVPN characteristics? (Choose two.)
A. DMVPN can interoperate with other vendors\\’ equipment.
B. DMVPN supports multicast replication at the hub.
C. DMVPN supports non-IP protocols.
D. DMVPN supports dynamic partial- or full-mesh tunnels.
Correct Answer: BD
QUESTION 12
Which statement is true about connecting an IP multicast domain that is operating in PIM dense mode to a PIM sparse
mode domain?
A. The interconnection must be made at the rendezvous point of the PIM sparse mode domain.
B. The connection can be made at any location in the network, as PIM sparse mode will inter-operate seamlessly with
PIM dense mode.
C. PIM dense mode and sparse mode domains are not inter-operable and cannot be connected.
D. The connection can be made at any location in the network, but PIM sparse mode and PIM dense mode cannot inter-
operate; IGMP must be used to provide the interconnection.
Correct Answer: A
QUESTION 13
When a multiprotocol environment is designed to have several routers redistribute among the routing domains, how can
routing loops be avoided?
A. by using the AS-PATH attribute
B. by using route tags
C. by activating split horizon
D. by implementing spanning tree
Correct Answer: B
Watch the Cisco CCDE 352-001 video tutorial online
We offer more ways to make it easier for everyone to learn, and YouTube is the best tool in the video. Follow channels: https://www.youtube.com/channel/UCXg-xz6fddo6wo1Or9eHdIQ/videos get more useful exam content.
Related 352-001 Popular Exam resources
| title | youtube | 352-001 CCDE – Cisco | lead4pass | Lead4Pass Total Questions | |
|---|---|---|---|---|---|
| Cisco 352-001 | lead4pass 352-001 dumps pdf | lead4pass 352-001 youtube | 352-001 CCDE – Cisco | https://www.lead4pass.com/352-001.html | 705 Q&A |
| Cisco CCDE | https://www.lead4pass.com/352-001.html | 105 Q&A |
Get Lead4Pass Coupons(12% OFF)
What are the advantages of Lead4pass?
We have a number of cisco, Microsoft, IBM, CompTIA, and other exam experts. We update exam data throughout the year.
Top exam pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!
Summarize：
We collect the latest Cisco CCDE 352-001 exam questions and answers as part of the first step to help you pass the exam. You can download 352-001 pdf online or watch youtube. Here you can improve your skills and exam experience! Click here for the full 352-001 exam questions.
