Candidates use the latest updated CCNP Enterprise 300-430 dumps from leads4pass: https://www.leads4pass.com/300-430.html, to help you get past the hurdle and successfully pass the 300-430 ENWLSI exam.
leads4pass 300-430 dumps provide PDF files and a VCE exam engine to help you practice 300-430 ENWLSI exam questions quickly and easily. The latest updated 300-430 dumps contain 162 exam questions and answers, verified by IT experts to be true and effective.
Share 13 CCNP Enterprise 300-430 dumps PDF:https://drive.google.com/file/d/12lBxZ6uPj8kW38v9V8HQq2SVT8F9gd1J/
Read CCNP Enterprise 300-430 dumps exam questions and answers online:
| Number of exam questions | Exam name | Release time | From | Previous issue |
| 13 | Implementing Cisco Enterprise Wireless Networks (ENWLSI) | Sep 21, 2022 | leads4pass | Aug 28, 2022 |
NEW QUESTION 1:
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
A. It must be Inbound because traffic goes to the WLC.
B. Packet direction has no significance; it is always Any.
C. It must be Outbound because it is traffic that is generated from the WLC.
D. To have the complete list of options, the CPU ACL must be created only by the CLI.
Correct Answer: A
NEW QUESTION 2:
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
A. 10 seconds
B. 15 seconds
C. 30 seconds
D. 60 seconds
Correct Answer: B
NEW QUESTION 3:
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102.
All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints.
Which action efficiently rectifies the issue according to Cisco recommendations?
A. Nothing needed to be added to the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
B. Disable DHCP proxy on the Cisco WLC.
C. Disable the DHCP proxy on the Cisco WLC and run the IP helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
D. Keep DHCP proxy enabled on the Cisco WLC and define a helper address under the VLAN interface to point to the two ISE servers.
Correct Answer: C
NEW QUESTION 4:
The security learn is concerned about access to all network devices, including the Cisco WLC. To permit only the admin subnet to have access to management, a CPU ACL is created and applied.
However, guest users cannot get to the web portal.
What must be configured to permit only admins to have access?
A. The guest portal must be configured on the CPU ACLs on the Cisco WLC.
B. Access to Cisco ISE must be allowed on the pre-authentication ACL.
C. Management traffic from the guest network must be configured on the ACL rules.
D. Traffic toward the virtual interface must be permitted.
Correct Answer: B
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/71978-acl-wlc.html
NEW QUESTION 5:
DRAG DROP
The network management team in a large shopping center has detected numerous rogue APs from local coffee shops that are broadcasting SSIDs.
All of these SSIDs have names starting with ATC (for example, ATC302, ATC011, and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature.
Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.
Select and Place:
Correct Answer:
NEW QUESTION 6:
Which QoS level is recommended for guest services?
A. gold
B. bronze
C. platinum
D. silver
Correct Answer: B
NEW QUESTION 7:
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?
A. SOAP/XML
B. NMSP
C. CAPWAP
D. SNMP
Correct Answer: B
NMSP (Network Mobility Services Protocol)?The protocol used for communication between Wireless LAN Controllers and the Mobility Services Engine.
In the case of a wIPS Deployment, this protocol provides a pathway for alarm information to be aggregated from controllers to the MSE and for wIPS configuration information to be pushed to the controller. This protocol is encrypted.
NEW QUESTION 8:
What is the difference between PIM sparse mode and PIM dense mode?
A. Sparse mode supports only one switch. The dense mode supports multiswitch networks.
B. Sparse mode floods. The dense mode uses distribution trees.
C. Sparse mode uses distribution trees. Dense mode floods.
D. Sparse mode supports multiswitch networks. The dense mode supports only one switch.
Correct Answer: C
NEW QUESTION 9:
A customer is deploying local web authentication.
Which software application must be implemented on Cisco ISE to utilize as a directory service?
A. Solaris Directory Service
B. LDAP
C. SAML
D. Novell eDirectory
Correct Answer: B
NEW QUESTION 10:
Which customizable security report on Cisco Prime Infrastructure will show rogue APs detected at a point in time?
A. Network Summary
B. Rogue APs Events
C. New Rogue APs
D. Rogue APs Count Summary
Correct Answer: A
NEW QUESTION 11:
An engineer completes the setup of a two-node Cisco ISE deployment for a guest portal. When testing the portal, the engineer notices that sometimes there is a certificate CN mismatch.
Which certificate type helps resolve this issue?
A. Public-Signed Root
B. Self-Signed Standard
C. Public-Signed SAN
D. Self-Signed Wildcard
Correct Answer: D
NEW QUESTION 12:
An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP.
Which client feature becomes available only if this configuration is changed?
A. multicast
B. static IP
C. fast roaming
D. mDNS
Correct Answer: C
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/flexconnect.html
NEW QUESTION 13:
An engineer is implementing RADIUS to restrict administrative control to the network with the WLC management IP address of 192.168.1.10 and an AP subnet of 192.168.2.0/24.
Which entry does the engineer define in the RADIUS server?
A. administrative access defined on the WLC and the network range 192.168.2.0/255.255.254.0
B. NAS entry of the virtual interface and the network range 192.168.2.0/255.255.255.0
C. shared secret defined on the WLC and the network range 192.168.1.0/255.255.254.0
D. WLC roles for commands and the network range 192.168.1.0/255.255.255.0
Correct Answer: A
…
Download 13 CCNP Enterprise 300-430 dumps PDF:https://drive.google.com/file/d/12lBxZ6uPj8kW38v9V8HQq2SVT8F9gd1J/
Candidates studying the CCNP Enterprise 300-430 dumps exam questions above can help them improve their exam experience, but this is only a warm-up.
You are welcome to download the latest updated CCNP Enterprise 300-430 dumps: https://www.leads4pass.com/300-430.html, A truly effective route for candidates to pass the 300-430 ENWLSI exam.